Products
 
 
  Photo Gallery
 














 
 
Acid proof
Chemical Proof
chemical resistance
Acid Resistant
Corrosion Proof
corrosive chemicals
corrosive India
acid proof lining flooring
acid proof bricks
Acid proof materials manufacturer
Chemical proof India
Acid Proof India
acid proof chemical manufacturer
Exporters of acid proof chemical
Acid Proof Material
industrial chimney
cement resin
Acid proof materials manufacturer
Indian Acid Proof Company
Acid Proof Manufacturer
Acid Proof India
Chemical Proof India
 
Search Us For:
 
Chemical resistant Materials,
acid resistant materials
acid proof materials
chemical proof materials
corrosion proof materials
corrosion solutions
corrosion treatment
epoxy lining
acid resistant lining
anti-corrosive treatment
anti-corrosive materials
red mandana stone flooring
acid resistant mastic lining
frp/frv lining
A.R. bricks lining
self leveling
 
                  Corrosion Proof
 
Modern Polymer Industries Manufucatuer and Exporter of
 
Chemical Resistant Bitumor Primer
Cashewmor C.N.S.L Resin Mortar
Chemical Resistant Bitumor Mastic
Potassium Silimor Mortar
Sodium Silimor Mortar
Phenomor Phenolic Resin Mortar
Sulphomor Sulphur Mortar
Positector 200 Series
 
 
                  Chemical Resistant Bitumor™ Primer  
Bitumor Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer.
 
Application
  • Concrete surface must be clean & dry and rough. No primer should be applied over smooth and wet surface.

  • After cleaning the concrete surface, one coat of Bitumor Primer should be applied with brush and allow to dry thoroughly.

  • The drying time will depend upon the temperature.
Packing
Bitumor Primer 25 Litre Drum
Note Bitumor Primer contains Volatilt and slightly toxic solvent. keep away from spark and open flames at working area.
 
                  Chemical Resistant Bitumor™ Mastic  

Bitumor Mastic is Acid and Alkali resistant for use as a protective impervious membrane suitable for concrete, brick work, steel etc. Bitumor Mastic have good resistance to large number of mildly corrosive conditions.

How to Use
Bitumor Mastic shall be broken into small pieces and heated. The surface on which it is to be applied should be primed with Bitumor Primer. It is applied with straight edged piece of wood or trowel. The surface shall not be put under service before 24 hrs. of application Mastic.

Bitumor Mastic is not recommended where there is excessive heat or solvents, mineral oil & greases are anticipated. It is adhesion to concrete surface previously primed with Bitumor Primer.
Packing 20 Kg. cake (approx)
 
                  Furomor™ Corrosion Proof Furan Resin Mortar  

Furmor is a Furan Resin based Chemical Resistant Mortar. When the liquid Resin & Powder is mixed in proportion, form workable mortar and after it setting and curing gives a black solid mass.

Furomor Mortar Resistant to
Acids, Alkalies, Saltsm Solvent, Greases, Detergents, Oils.
Maximum Temperature 175°C
Application
It is widely used for Acid Resistant Bricks/Tiles linging as a bedding and jointing mortar for Chemical Reaction Vessels, Tanks, Floor, Drain, Foundation, Neutralization Pit etc. It is also used for repairing Glasslined Vessels.

Carbon Filled Furomor Mortar is to be used to resist hot & highly concentrated Alkalies , Hydrofloric Acid, Flourid Salts etc.
Packing
Furomor Resin 25 Kg. Drum
Furomor Powder 25 Kg. Bag

Furomor Corrosion Proof Furan Resin Mortar manufacturer & Exporter india
 
                  Phenomor™ Corrosion Proof Phenolic Resin Mortar  

Phenomor is a phenolic Resin based Chemical Resistant Mortar. When the liquid Resin & Powder is mixed in proporation, forms workable mortar and after it setting and curing gives a black solid mass.

Phenomor Mortar Resistant to
Concentrated H2SO4 acid, Phospheric acid Non-oxidizing acids, Dilute Oxidizing acids, Solvents and Neutral Salts.
Maximum Temperature 175°C
Application
It is widely used for Acid Resistant Bricks/ Tiles lining as a bedding and jointing mortar for Chemical Reaction Vessels, Tanks, floor, Drain, Foundation etc.
Packing
Phenomor Resin 25 Kg. Drum
Phenomor Powder 25 Kg. Bag

Phenomor Corrosion Proof Phenolic Resin Mortar
 
                  Silimor™ Corrosion Proof silicate Solution Mortar  

Silimor is a Silicate solution based Chemical Resistant Mortar. When the liquid Resin & Powder is mixed in proportion forms workable mortar and after it setting and curing gives a Off-white solid mass.

Silimor Mortor resistant to Oxidizing & Non-Oxidizing acids except Hydroflouric aicd.
Maximum Temperature 900° C
Application
It is widely used for Acid Resistant Bricks/ Titles lining as a bedding and jointing mortar for tanks Floor, Drain, Foundation etc.
Packing
Silimor Solution 25 Kg. Drum
Silimor Powder 50 Kg. Bag.

Prepatation of Chemical Resistant Mortars consists of Resin & Powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 pbw Resin & 3 pbw Powder. The ration will vary slightly depending upon temperature and working condition.

Stirer the Resin thoroughly before using. Place liquid resin in a suitable mixing pan and add powder. Mix throughly with the Spatula or Trowel. the mixing operation shall be continued until a uniform mixture is obtained.

Make sure that all the mortar is used from the mixing pan before another batch is prepared.

 
                  Sulphomor™ Corrosion Proof Mortar  

Sulphomor is a Sulphur based mortar containing Plasticizer & filter. The melt mortar is extremely fluid and pours quite easily.

Silimor Mortor resistant to Non-Oxidizing acids, dilute oxidizing acids and neutral salts.
Maximum Temperature 90°C
How to Use
The mortar should be heated at low temperature in a suitable Kettle by stirring with metal rod or ladle. The surface shall be laid first with membrane. Over the dry coat of membrane, the chemical resistant bricks or tiles be placed on spacer chips. Melted Sulphomor Mortar shall be poured through joints of bricks or tiles. In case of vertical surface joints of bricks or tiles are covered by applying with adhesive paper. sulphomor mortar is poured between the wall surface and the tile or bricks.
Note
If Sulphomor is over heated or ignited a tight cover or wet gunny bags shall be kept ready for use in case of fire. Sulphomor Mortar burns with a low blue flame. If this should happen, heating should be stopped and the vessel should be covered with lid or wet gunny bags. if the mortar thickens or over heating, it should be allowed to cool and stir till it become thin. Care should be taken that water or damp mortar should not fall in the heating vessel in order to avoid foaming.
Packing
Sulphomor Ingot - 50 Kg. Bag
Power - 50 Kg Bag
 
                  Cashewmor™ Corrorsion Proof C.N.S.L.Resin Mortar  

Cashewmor is a C.N.S.L. Resin based Chemical Resistant Mortar. When the liquid Resin & Powder is mixted in proportain, forms workable mortar and after it setting and curing gives a black solid mass. It is relatively Plastic in nature.

Cashewmor Mortor resistant to Acids, Alkalies, mixed alkaline solutions with acids.
Maximum Temperature 180° C
Application
It is widely used for Acid Resistant Bricks/ Tiles lining as a bedding and jointing mortar. It can be used for jointing Chemical Resistant Stoneware Pipes. It is also used for ETP Plants. It is suitable where excellent resistant property and heavy impacts subjected to the surface of floors and tank is required. Cashewmor mortar adheres strongly on the Ceramic, Concrete surface and metals so, it can be used as a monolithic lining for the construction of dilute acids storage tanks.
Packing
Cashewmor Resin 25 Kg. Drum
Cashewmor Powder 25 Kg. Bag.
Cashwmor Corrorsion Proof CNSL Reesin Mortar